Isoguard Kits & Gaskets
The ISOGUARD sealing/isolating gasket system is designed for general applications where electrical flange isolation and corrosion control are required on pipes containing water/waste - water, gas, natural gas, oil and other hydrocarbon based medias up to 302F (150C). Available for flat face, raised face and ring type joint flanges from 1/2" to 120" (and correspond - ing API and DN diameters), ANSI 150-1500#, API 2-5K and PN 20-250, the ISOGUARD TM gasket is an engineered value added solution for trouble free operation. The ISOGUARD TM sealing/isolating gasket system consists of a retainer with an incline-plane seal groove geometry designed to optimize each seal's elastic memory, in conjunction with a proven rectangular sealing element (Quad ring). This design guarantees low bolt load requirements and high sealing reliability. ISOGUARD TM systems are available with a variety of retainers and seal ele - ments.
Defender Kits & Gaskets
DEFENDER™ isolation kits contain a steel core with GRE bonded to both sides for ultimate strength and integrity. Spring loaded PFTE seals are locked into machined grooves ensuring that the seals are anchored into the steel core. DEFENDER is proven in the most hostile service environments inclusing H2s “sour” service. DEFENDER can be specified for pressure ratings up to API 6A 15000.
ISOGUARD™ isolation kits feature GRE gaskets with quality pressure energised seals. The inclined plane groove and one piece seal element create a dynamic and reliable seal with guaranteed corrosion protection. A range of materials offer a service range from -150°c to plus 200°c.
Sealing Isolation Kits & Gaskets
JLM Supply provides the full array of Lamons Isotek gaskets which are constructed of premium engineering materials. The isolation products include a wide selection of isolating/sealing gaskets along with a variety of full isolating sleeves and washers to complete the electrical isolation of a flange assembly.
Defender FS Sealing/Isolation (Fire Safety)
The ISOGUARD sealing/isolating gasket system is designed for general applications where electrical flange isolation and corrosion control are required on pipes containing water/waste - water, gas, natural gas, oil and other hydrocarbon based medias up to 302F (150C). Available for flat face, raised face and ring type joint flanges from 1/2" to 120" (and correspond - ing API and DN diameters), ANSI 150-1500#, API 2-5K and PN 20-250, the ISOGUARD TM gasket is an engineered value added solution for trouble free operation. The ISOGUARD TM sealing/isolating gasket system consists of a retainer with an incline-plane seal groove geometry designed to optimize each seal's elastic memory, in conjunction with a proven rectangular sealing element (Quad ring). This design guarantees low bolt load requirements and high sealing reliability. ISOGUARD TM systems are available with a variety of retainers and seal ele - ments.
DEFENDER™ fire safe isolation kits are the ultimate in corrosion protection, seal security and fire protection all in one. The Kammprofile core and Matrix PTFE primary seal ensures seal integrity at the highest pressures while the special PTFE coating and GRE complete the flange isolation. In the event of a fire special washers and a secondary seal prevent the flange from failing. Tested and accredited to API 6FB “fire safe”.
Sleeve and Washer Sets
Lamons sleeve and washers sets, when combined with our sealing/isolation gaskets, complete a Flange Isolation Kit. For a successful flange isolation kit, it’s critical to use the appropriate material for your application. Compressive strength, flexural strength, and cut through resistance are key material physical properties that should not be over looked.